Optimisation of effluent treatment through chemical coagulation and flocculation to increase the throughput of continuous treatment plant.

Automatic pH correction system for discharge water to comply with discharge water consent limits.

Paperless chart recorder for pH and flow rate data logging to help investigate the root cause of problem during poor effluent treatment.

7,000 litre graving clarifier for sedimentation of flocs, including influent ring, feed well, scrum baffle, v-notched weir, effluent trough, slow agitating rake and access platform.

Vacuum belt filtration system for liquid-solid separation.

10,000 litre batch treatment polypropylene tank with decanting ports, 2,000 litre flocculant preparation tank, supply of acid and caustic from IBCs and control system for automatic process.

750 litre plate and frame filter press on 1000 litre frame for future expansion with access platform, hydraulic system, pendant control for plates opening & closing, safety curtain, DE solution preparation tank for pre-coating and filtrate tank for sampling and discharging water to sewer.

Gravity paper band filter for 120 litres per hour flow rate for liquid-solid separation with option of automatic timer and level control system, removable sump for cleaning, contactless level sensor for smooth operation and lower paper roll sensor to raise alarm for operators.

Halogen lamp for rapid test solid contents in the influent and moisture contents in sludge cake.

Reduction in Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD), Suspended Solids, Sulphates, etc to meet the discharge water consent limits.

Lamella separate for removal of sand particles from water.

Centrifugal separation of Isopar from water at 3000 rpm for solvent recovery.